Contents general data. 4 lysaght Zeds & Cees. 6 hook-lok® ii bridging system. 9 lysaght series and bridging system 12 purlin & girt accessories. Zed and Cee purlins. This manual incorporates the whole range of LYSAGHT purlins and girts in a much wider range of spanning and bridging configurations. into performance improvements of the purlin profile. this has lead to the development of the lySagHt SuPazeD® and SuPaCee® profile. these new profiles are.
|Published (Last):||18 September 2005|
|PDF File Size:||19.82 Mb|
|ePub File Size:||2.52 Mb|
|Price:||Free* [*Free Regsitration Required]|
Metal truss – LYSAGHT® FASCIA PURLIN – BlueScope Steel
The result is increased purlin spacing, increased purlin spans frame or rafter spacing and fewer rows of bridging. Comparisons can only be successfully completed when a “like-for-like” comparison is made.
Differences can lsyaght from a number of reasons such as the selection of design parameters for.
The Cee profile lyxaght equal flanges. The Zed profile has the flanges facing in opposite direction and one flange is “wide” and one is “narrow” to allow lapping. Lip stiffeners at the free end, or extremity, of the flange.
These lips point back towards the centre of the profile. The result is increased purlin spacing, increased purlin spans frame or rafter spacing and fewer rows of bridging Notes: Differences can result from a number of reasons such as the selection of design parameters for; Cleat restraints, cladding restraints Bridging location Profile dimensions Lap length Pur,in Longitudinal web stiffeners 4 off Lip lysxght an added stiffeners at the free end, or extremity, of the lip.
These added stiffeners point back towards the web of the profile No change to the accepted practices of packaging, marking and handling. No change to the accepted traditional practices of installation. The lapping method is unchanged, the cleat fixing is unchanged, the bridging installation is unchanged, the fixing of fly bracing and accessories is lyxaght Minimal face-to-face metal contact means minimised staining of surfaces, and no locking of purlins in frozen bundles.
Rounded lysavht means added site safety from handling of sharp edges.
Purlins & Girts
Rounded corners means added site safety due to ease of sliding of purlins on rafter surfaces, and no damage to surfaces of painted lysagbt from sliding of purlins during installation. Rigidity of purlin means added safety and less labour requirements during the flipping of purlins during installation onto cleats.
Unique patented profile, which cannot be copied. What is specified is what you get.
Purlins & Lintels
Thus the design strength is not compromised and the material is guaranteed to be Australian Significant improvement in strength performance can be achieved in many purlin sizes and span configurations. Manufactured in NSW, QLD and SA, availability in other states is on an application basis Purlins should be stored off the ground and on a slight slope so that water can drain away Purlins should be stored off the ground and on a slight slope so that water can drain away Direct contact of incompatible material with coating should be avoided.
In such applications, suitable paint systems should be obtained from paint manufacturers Consider orientation of Zed and Cee purlins in relation to possible build-up of substances such as ylsaght or grain Special transport requirements are needed for lengths over mm. Select gauge BMT 1. Select a colour Galvaspan. Update Suppliers Near You. Phone 02 Phone 07 View all Lysaght products View all Structural Products products.
Display all types Brochure.